Sales Manager – customer configuration

ByAdmin September 10, 2015September 15, 2015

Routing Generator Controller

ByAdmin September 9, 2015

Control Centre version 3.10.7 has introduced the feature of blocking dial codes on carrier level basis. This functionality is supported across the whole system, so you can configure a dial code as blocked for a certain Customer (or a Tariff), you can generate an offer with blocked dial codes for your Customers in Sales Manager,…

LCR Planner

Routing Formulas

ByAdmin September 15, 2015July 17, 2019

Control Centre 3.6 introduces Routing formulas. The following document describes how to use the formulas to automate your routing generation. To see all available methods read: Routing formulas – methods Applying formula The user can decide whether he wants to apply his formula on a single dial code, multiple dial codes or any destination that…

Configuration | Money | Statpak

Trunks configuration

ByAdmin February 14, 2022February 14, 2022

Trunk configuration is the area that determines proper recognition of who the Customer and who the Supplier was in a certain call. When the call has been made, the switch produces a CDR with the two trunks in it:1) the incoming trunk – which specifies the Customer who sent the call2) the outgoing trunk –…

Statpak

View by Carrier

ByAdmin September 10, 2015September 14, 2015

LCR Planner

Routing Plans Introduction

ByAdmin September 13, 2015September 14, 2015

Similar Posts