Novatel Control Centre allows for configuring the following types of routing:1) standard routing – prioritized order of carrier choices to try for routing by the switch2) percentage routing – for balancing the traffic on a route across multiple carriers3) percentage routing with backup carriers – the extension to the percentage routing with carriers to take…
Control Centre version 3.10.7 has introduced the feature of blocking dial codes on carrier level basis. This functionality is supported across the whole system, so you can configure a dial code as blocked for a certain Customer (or a Tariff), you can generate an offer with blocked dial codes for your Customers in Sales Manager,…
Routing Plans – blocked dial codes Dial codes blocking is used for temporary or permanent blocking of some particular phone numbers or whole destinations. The result of a call attempt for a blocked dial code is a blocked supplier prefix returned by NRS, which is a signal for the switch that the call should not…
Routing Plans – Excluded dial codes Dial codes exclusion is used to limit the number of available dial codes in a routing plan. It can be used whenever there is a need to create a routing plan that uses only a part of MDL. The result of a call attempt for an excluded dial code…
The following scenario is used to describe the meaning and functionality of Floor Price and Negative-Marin Prevention in the NovaTel Control Centre solution. We have Customer rate for the destination Afghanistan 93 being $0.5000 And the routing being Afghanistan 93: AT&T [$0.3000], BT [$0.4000], C&W [$0.5000], D-Telecom [$0.6000] In such a case if Negative Margin…
Mixed Routing Mixed routing is a compliation of percentage and standard routing. The user may define a percentage value for a number of carriers. The total percentage should be less than 100%. The remaining percentage is assigned to the standard routing. For example: Afghanistan,93,60% ATL,DTAG,ATelecom means that 60% of traffic for 93 is routed by…
Percentage Routing Percentage routing alows the user to define percentage distribution between multiple suppliers. For example one supplier may take 60% of traffic, when another supplier takes 40%. The user is also allowed to configure backup carriers to be used if all the suppliers that are used in percentage routing fail. The order of carriers…
Standard Routing Standard routing is the default routing for all routes. It can be modified by the user. By default Standard routing orders suppliers by price from the cheapest to the most expensive ones. The user may want to include quality factor in routing calculation. By using Price/Quality slider they can set the price/quality ratio…
Routing Types There are four routing types available in Planner: Standard – the order of suppliers is automatically calculated by Planner. It depends on price/quality settings configured by the user. The user can overrides position of suppliers manually or exclude unwanted choices. Percentage – the number and order of supplier is fixed and defined by…
Control Centre 3.6 introduces Routing formulas. The following document describes how to use the formulas to automate your routing generation. To see all available methods read: Routing formulas – methods Applying formula The user can decide whether he wants to apply his formula on a single dial code, multiple dial codes or any destination that…
Supplier Rates screen introduction Supplier Rates screen display options
